This software is a reducing instrument designed for quite a lot of duties, characterised by its segmented blade that permits for straightforward snapping off of lifeless segments to disclose a recent, sharp edge. Its development incorporates a strong deal with, typically with an ergonomic design, to reinforce grip and management throughout use. The mannequin designation specifies specific options similar to blade width, general dimensions, and the producer’s designation for a particular product line identified for its sturdiness and efficiency.
The utility of the sort of instrument lies in its means to keep up a constantly sharp reducing floor with out the necessity for sharpening. This function reduces downtime and enhances effectivity throughout a spread of functions, from development and DIY initiatives to normal goal reducing duties. Its growth displays an evolution in reducing software design, prioritizing consumer comfort, security, and longevity. The particular mannequin typically represents developments in supplies and development methods, enhancing its resistance to put on and tear in demanding environments.
The next sections will element the elements, functionalities, and functions of the sort of software, offering a complete overview of its options and its function throughout numerous industries.
1. Blade segmentation
Blade segmentation is a defining attribute of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This design function immediately influences the software’s usability, upkeep, and general lifespan, contributing considerably to its attraction in each skilled and DIY functions.
-
Constant Sharpness
The segmented blade design permits the consumer to show a recent, sharp innovative by snapping off a uninteresting section. This eliminates the necessity for sharpening, sustaining constant reducing efficiency all through the blade’s lifespan. As an illustration, when reducing by drywall or cardboard, the preliminary section could develop into blunt; snapping it off instantly restores optimum reducing functionality.
-
Blade Economic system and Longevity
The segmented design successfully extends the lifetime of the blade. As a substitute of discarding a blade when it turns into uninteresting in a single space, solely the worn section is eliminated, maximizing the utility of all the blade. This design facet will increase the product’s worth proposition by lowering the frequency of blade replacements. Utilizing the total potential of the blade reduces waste and creates price effectivity.
-
Security Issues
Whereas blade segmentation offers benefits, it additionally introduces particular security issues. The act of snapping off a section requires cautious execution to stop damage. The uncovered blade edge after snapping will be notably sharp and requires warning. The design of the snap-off mechanism itself should be strong to make sure the blade breaks cleanly and predictably. Poor-quality instruments with unreliable snap-off mechanisms can pose a security hazard.
-
Materials Composition and Manufacturing
The effectiveness of blade segmentation is contingent upon the fabric composition and manufacturing means of the blade. Excessive-quality metal and exact segmentation are important for clear, predictable breaks. The particular metal used within the Stanley 10-817 25mm FatMax Xtreme is chosen for its means to keep up sharpness and snap cleanly alongside the pre-scored strains.
In abstract, blade segmentation is integral to the design and performance of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This design impacts the software’s usability, upkeep necessities, security issues, and general financial worth. These components collectively affect its widespread adoption throughout numerous consumer teams.
2. Ergonomic deal with
The ergonomic deal with of the Stanley 10-817 25mm FatMax Xtreme snap-off knife represents an important design ingredient that immediately impacts consumer expertise, security, and effectivity. Its significance stems from the extended and infrequently repetitive nature of duties for which such instruments are employed. A poorly designed deal with can result in discomfort, hand fatigue, and an elevated danger of damage, whereas an ergonomically sound design mitigates these dangers, permitting for prolonged use and enhanced precision. The FatMax Xtreme sequence, particularly, emphasizes a deal with designed for a safe and cozy grip, even beneath demanding situations.
The form, materials, and floor texture of the deal with all contribute to its ergonomic properties. Contoured grips that conform to the pure form of the hand scale back pressure on particular strain factors. Overmolded supplies, similar to rubber or textured polymers, improve grip and forestall slippage, notably in moist or oily situations. The deal with’s dimension can also be important; it should be giant sufficient to offer enough buy however not so giant as to trigger hand fatigue. As an illustration, tradespeople steadily use these knives for reducing supplies like drywall, flooring, and roofing felt. An ergonomic deal with permits them to carry out these duties for prolonged intervals with out growing hand or wrist ache, which interprets to elevated productiveness and decreased danger of work-related accidents.
In conclusion, the ergonomic deal with of the Stanley 10-817 25mm FatMax Xtreme isn’t merely an aesthetic function however a vital part that contributes on to consumer well-being and operational effectiveness. By lowering pressure and enhancing grip, the ergonomic design permits for safer, extra snug, and extra productive use of the software. This design consideration underscores the significance of contemplating human components in software design, notably in skilled settings the place repetitive duties are frequent.
3. Blade Width (25mm)
The 25mm blade width of the Stanley 10-817 FatMax Xtreme snap-off knife is a key specification figuring out its utility throughout varied functions. This dimension isn’t arbitrary; it’s intentionally chosen to steadiness reducing capability, blade sturdiness, and precision, influencing the kind of supplies that may be successfully processed and the general efficiency of the software.
-
Reducing Capability and Materials Suitability
The 25mm blade width offers a considerable innovative, enabling the software to effectively slice by thicker supplies in comparison with narrower blade options. This width is appropriate for reducing duties involving drywall, cardboard, leather-based, and a few sorts of plastic. The broader blade additionally distributes power throughout a bigger space, lowering the chance of blade breakage when encountering resistance. Nevertheless, the elevated width could restrict the software’s maneuverability in tight areas or when performing intricate cuts that require finer management. For instance, whereas it excels at scoring drywall, it is probably not the optimum selection for delicate crafting duties.
-
Blade Stability and Sturdiness
A wider blade inherently gives better stability throughout reducing operations. The elevated floor space offers enhanced resistance to bending and deflection, leading to straighter and extra managed cuts. That is notably related when reducing supplies that are inclined to shift or buckle beneath strain. The 25mm width additionally contributes to the blade’s general sturdiness, as it could actually face up to better stress earlier than fracturing or dulling. The Stanley FatMax Xtreme sequence, specifically, is engineered for heavy-duty use, and the 25mm blade width enhances this design philosophy by guaranteeing the blade can endure the pains of demanding jobsite situations.
-
Power Utility and Ergonomics
The blade width immediately influences the quantity of power required to provoke and keep a minimize. A wider blade necessitates better power to penetrate the fabric, particularly if the blade isn’t exceptionally sharp. This will have ergonomic implications, as customers could have to exert extra effort, doubtlessly resulting in fatigue over extended use. Due to this fact, the deal with design and general ergonomics of the Stanley 10-817 are essential for mitigating these results, permitting customers to comfortably apply the required power with out undue pressure.
-
Relationship to Snap-Off Segmentation
The 25mm blade width works in live performance with the snap-off segmentation design. This width offers ample materials for a number of segments, every providing a recent innovative as wanted. The segmentation intervals are designed to optimize the usage of the blade materials whereas sustaining ample structural integrity for every section. The 25mm width permits for a steadiness between the variety of segments and the sturdiness of every section, contributing to the general longevity and worth of the blade. The effectivity of the snap-off mechanism is important to totally notice the advantages of this design.
In summation, the 25mm blade width is a defining attribute of the Stanley 10-817 FatMax Xtreme snap-off knife, influencing its reducing capability, sturdiness, ergonomics, and the effectiveness of its snap-off segmentation. This dimension is fastidiously thought of to optimize the software’s efficiency throughout a broad vary of functions, solidifying its place as a flexible and dependable reducing instrument.
4. Sturdiness
Sturdiness is a paramount consideration within the design and number of any reducing software, and it performs a very important function in evaluating the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This attribute dictates the software’s lifespan, its means to face up to demanding work environments, and its general worth proposition. The “FatMax Xtreme” designation itself suggests an emphasis on robustness and longevity.
-
Materials Composition and Development
The sturdiness of the Stanley 10-817 stems from the supplies utilized in its development. Excessive-carbon metal is usually employed for the blade to offer a steadiness of hardness and toughness, resisting put on and fracture. The deal with usually incorporates impact-resistant polymers or composite supplies designed to face up to drops, impacts, and publicity to harsh chemical compounds or solvents. The standard of the supplies and the precision of the manufacturing processes immediately have an effect on the software’s means to endure extended use and adversarial situations. As an illustration, a development employee utilizing the knife every day on a job web site requires a software able to withstanding fixed abrasion and potential unintentional impacts.
-
Blade Phase Integrity and Break Resistance
The snap-off design necessitates a blade with fastidiously engineered segmentation. The integrity of those segments and their resistance to untimely breakage are essential for sturdiness. A blade that snaps prematurely or fails to interrupt cleanly compromises security and reduces the software’s usability. The design and manufacturing processes should guarantee constant and predictable breaking factors whereas sustaining the energy of every section. When reducing thick cardboard or a number of layers of fabric, a blade with weak segments would shortly develop into unusable, highlighting the significance of section integrity.
-
Deal with Ergonomics and Structural Integrity
Whereas the ergonomic design of the deal with contributes to consumer consolation, it additionally impacts the software’s general sturdiness. A deal with that’s poorly connected or susceptible to cracking beneath stress will render the software unusable, whatever the blade’s situation. The deal with should be securely fixed to the blade housing and able to withstanding important power with out deformation or failure. Tradespeople making use of substantial strain to the knife whereas reducing by dense supplies require a deal with that maintains its structural integrity, stopping slippage or breakage.
-
Corrosion Resistance
Publicity to moisture and corrosive substances can considerably degrade the sturdiness of a reducing software. The Stanley 10-817 typically incorporates coatings or finishes on the blade and deal with to reinforce corrosion resistance. That is notably necessary in environments the place the software could also be uncovered to humidity, saltwater, or chemical compounds. A knife utilized in plumbing or marine functions, for instance, requires enhanced corrosion resistance to stop rust and keep its performance over time.
The sides of fabric composition, blade section integrity, deal with development, and corrosion resistance collectively decide the general sturdiness of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. These components are interconnected, and a weak point in anybody space can compromise the software’s lifespan and efficiency. The “FatMax Xtreme” designation displays a deliberate engineering effort to maximise these features, making a software that may face up to the calls for {of professional} use and supply long-term worth.
5. Snap-off Mechanism
The snap-off mechanism is a defining attribute of the Stanley 10-817 25mm FatMax Xtreme snap-off knife, immediately influencing its performance and consumer expertise. This mechanism permits the consumer to show a recent, sharp innovative by breaking off a uninteresting section of the blade, thereby eliminating the necessity for sharpening and increasing the blade’s usable life.
-
Mechanism Elements and Operation
The snap-off mechanism usually contains a slider or push-button that advances the blade, a locking mechanism to safe the blade on the desired extension, and pre-scored segments alongside the blade’s size. To show a brand new innovative, the consumer extends the blade, aligns the uninteresting section with a delegated breaking level, and applies strain to snap it off, typically utilizing a built-in breaker or pliers. The effectiveness of this mechanism relies on the precision of the blade segmentation and the reliability of the slider and locking elements. A malfunctioning locking mechanism can result in blade slippage, posing a security hazard.
-
Security Options and Issues
The design of the snap-off mechanism incorporates security options to reduce the chance of damage. These options embrace a strong locking mechanism to stop unintentional blade retraction, a contoured deal with for safe grip, and typically, a blade snapper to securely break off uninteresting segments. Nevertheless, the consumer should train warning when snapping off blade segments to keep away from cuts or flying particles. Correct coaching and adherence to security pointers are important for the secure and efficient use of this mechanism. The mechanism’s reliability contributes to the general security profile, the place a poorly designed mechanism may trigger unpredictable blade snapping.
-
Materials Composition and Sturdiness of the Mechanism
The supplies used within the snap-off mechanism’s development considerably impression its sturdiness and longevity. Excessive-quality metallic or strengthened polymers are sometimes employed to face up to the repeated stress of blade extension, retraction, and locking. The mechanism’s resistance to put on and tear immediately impacts the software’s lifespan and its means to keep up constant efficiency over time. The Stanley 10-817 FatMax Xtreme, with its emphasis on sturdiness, usually incorporates strong supplies in its snap-off mechanism to make sure dependable operation beneath demanding situations. An inexpensive mechanism results in speedy put on, making the general software ineffective.
-
Upkeep and Substitute
The snap-off mechanism requires minimal upkeep, usually involving occasional cleansing to take away particles that would impede its operation. Nevertheless, the mechanism’s elements are topic to put on and tear, and finally, alternative could also be obligatory. The provision of alternative elements and the benefit of disassembly and reassembly are components that affect the software’s long-term worth. A well-designed mechanism permits for straightforward blade alternative and, in some instances, component-level repairs, extending the software’s service life. The complexity of the mechanism can deter customers from trying repairs, emphasizing the worth of a strong, long-lasting design.
In conclusion, the snap-off mechanism is an integral element of the Stanley 10-817 25mm FatMax Xtreme snap-off knife, immediately impacting its usability, security, and longevity. The design, supplies, and operation of this mechanism are important issues in evaluating the software’s general efficiency and suitability for varied reducing duties. The mechanism’s reliability, mixed with correct consumer method, permits environment friendly and secure use of the software.
6. FatMax Xtreme Sequence
The “FatMax Xtreme Sequence” represents a product line from Stanley identified for enhanced sturdiness and efficiency traits. The “Stanley 10-817 25mm FatMax Xtreme snap-off knife” is a particular product inside this sequence, inheriting the sequence’ design ideas and materials decisions meant to offer superior resilience in demanding functions. The sequence designation signifies the knife is engineered to face up to harsher situations and extra frequent use in comparison with normal Stanley choices. As an illustration, the deal with materials could also be upgraded to face up to greater impression forces, or the blade locking mechanism could also be strengthened to withstand put on. This affiliation results in an expectation of better reliability and prolonged lifespan for the knife. The combination of “FatMax Xtreme Sequence” elements within the “Stanley 10-817 25mm FatMax Xtreme snap-off knife” creates a product designed for skilled use.
A sensible consequence of this connection is the knife’s suitability to be used in development, industrial, or different demanding environments. Professionals similar to electricians, plumbers, and carpenters typically require instruments able to withstanding every day use and potential publicity to harsh situations. The “FatMax Xtreme Sequence” designation alerts to those customers that the knife is designed to fulfill these necessities. The improved sturdiness traits present a level of confidence, doubtlessly lowering the frequency of replacements and minimizing downtime attributable to software failure. A business development crew, for instance, would possibly select the 10-817 attributable to its fame inside the FatMax Xtreme lineup, resulting in fewer interruptions brought on by software malfunction.
In abstract, the “FatMax Xtreme Sequence” designation is a important element of the “Stanley 10-817 25mm FatMax Xtreme snap-off knife,” influencing materials choice, design options, and general efficiency expectations. The connection implies a deal with enhanced sturdiness and suitability for demanding functions, translating to tangible advantages for skilled customers. Though challenges associated to software upkeep and applicable utilization stay, the affiliation with the “FatMax Xtreme Sequence” offers a stage of assurance relating to the knife’s means to face up to rigorous use.
7. Mannequin Identification (10-817)
The mannequin identification code “10-817” serves as a singular identifier for a particular configuration of the Stanley 25mm FatMax Xtreme snap-off knife. This code is essential for distinguishing this specific software from different comparable fashions inside the Stanley product line and for precisely referencing its specs, alternative elements, and associated documentation.
-
Specification Precision
The “10-817” designation ensures that customers and retailers can exactly establish the software’s traits, together with blade width, deal with design, and particular options inside the FatMax Xtreme sequence. For instance, a elements provider can use this code to verify {that a} alternative blade is appropriate with the meant software, stopping errors in ordering and guaranteeing correct performance. The dearth of a exact identifier may result in the number of incompatible elements, affecting efficiency and security.
-
Guarantee and Assist
The mannequin quantity is important for guarantee claims and buyer assist inquiries. Stanley and its licensed service suppliers use this code to confirm the software’s authenticity and decide the applicability of guarantee protection. The absence of a sound mannequin quantity or an try to assert guarantee on a counterfeit product would probably lead to denial of service. This code safeguards each the producer and the buyer in opposition to fraudulent actions.
-
Stock Administration and Logistics
Retailers and distributors depend on the “10-817” designation for environment friendly stock administration and logistics. This code permits correct monitoring of inventory ranges, streamlined order processing, and correct categorization of the software inside product catalogs. The usage of standardized mannequin numbers reduces the chance of delivery errors and ensures that clients obtain the right product. An inaccurate or lacking mannequin quantity may disrupt provide chains and result in buyer dissatisfaction.
-
Product Documentation and Security Info
The “10-817” identifier is immediately linked to particular product documentation, together with consumer manuals, security directions, and technical specs. This documentation offers customers with important data on the right use, upkeep, and potential hazards related to the software. Entry to correct documentation is important for guaranteeing secure operation and maximizing the software’s lifespan. With no particular mannequin quantity, finding and referencing the right documentation can be considerably tougher, doubtlessly rising the chance of accidents or improper dealing with.
In conclusion, the mannequin identification code “10-817” is an indispensable ingredient of the Stanley 25mm FatMax Xtreme snap-off knife. It facilitates exact specification, guarantee assist, environment friendly stock administration, and entry to essential product documentation, contributing to the general reliability and worth of the software. This identifier isn’t merely an arbitrary quantity however a key element of the product’s id and its integration inside the broader Stanley ecosystem.
Regularly Requested Questions
This part addresses frequent inquiries and considerations relating to the Stanley 10-817 25mm FatMax Xtreme snap-off knife, offering readability on its options, utilization, and upkeep.
Query 1: What distinguishes the FatMax Xtreme sequence from different Stanley snap-off knives?
The FatMax Xtreme sequence emphasizes enhanced sturdiness and robustness in comparison with normal Stanley knives. This usually interprets to stronger supplies within the deal with development, a safer blade locking mechanism, and an general design meant to face up to rigorous use and demanding work environments. The particular enhancements current within the 10-817 mannequin are aligned with this core precept.
Query 2: How does one safely eliminate snapped-off blade segments?
Snapped-off blade segments pose a laceration hazard and should be disposed of responsibly. The advisable follow entails accumulating the segments in a puncture-resistant container, similar to a heavy-duty plastic bottle or a delegated sharps container. This container needs to be clearly labeled to point its contents and disposed of in accordance with native rules for sharp waste disposal.
Query 3: What sort of blade alternative is advisable for the 10-817 mannequin?
The Stanley 10-817 25mm FatMax Xtreme snap-off knife is designed to simply accept 25mm snap-off alternative blades. It’s advisable to make use of real Stanley alternative blades or these particularly advisable by Stanley for optimum efficiency and security. Utilizing non-compatible blades could compromise the knife’s performance and enhance the chance of accidents.
Query 4: What upkeep is required to make sure the longevity of this software?
Minimal upkeep is required for the Stanley 10-817. Common cleansing to take away gathered particles from the blade slider and locking mechanism is advisable. A dry fabric is mostly ample; keep away from utilizing extreme lubricants, as they’ll entice grime and hinder the mechanism’s operation. Inspecting the blade locking mechanism periodically for indicators of wear and tear or harm can also be advisable.
Query 5: What are the first security precautions to look at when utilizing a snap-off knife?
Security precautions embrace all the time retracting the blade totally when not in use, utilizing applicable private protecting tools similar to gloves and eye safety, and snapping off blade segments fastidiously and away from oneself and others. By no means apply extreme power when reducing, and all the time make sure the workpiece is securely supported. A pointy blade is safer than a uninteresting blade, as much less power is required.
Query 6: Can the blade locking mechanism be adjusted or tightened if it turns into free?
The blade locking mechanism within the Stanley 10-817 is mostly not designed for consumer adjustment. If the locking mechanism turns into free or fails to securely maintain the blade, it could point out put on or harm. In such instances, the software needs to be inspected by a certified technician or changed to keep away from potential security hazards. Making an attempt unauthorized repairs could void the guarantee and compromise the software’s integrity.
In essence, accountable use, correct disposal, and adherence to security pointers are paramount when working the Stanley 10-817 25mm FatMax Xtreme snap-off knife.
The next part will elaborate on sensible functions of the Stanley 10-817 25mm FatMax Xtreme snap-off knife.
Optimizing Utility
To maximise the efficiency and lifespan of this software, adherence to particular pointers is advisable. The next ideas promote secure and environment friendly operation.
Tip 1: Choose Acceptable Blade Extension. Lengthen the blade solely to the minimal size required for the duty at hand. Extreme extension will increase the chance of blade breakage and compromises reducing precision. Make sure the locking mechanism is totally engaged earlier than making use of strain.
Tip 2: Make use of Appropriate Reducing Angle. Preserve a shallow reducing angle to reduce stress on the blade. Keep away from twisting or bending the blade throughout use, as this will result in untimely put on or fracture. Use a managed, deliberate movement.
Tip 3: Make the most of Acceptable Reducing Floor. Make use of an appropriate reducing floor, similar to a self-healing mat or a chunk of scrap materials. Keep away from reducing immediately on onerous surfaces like concrete or metallic, as this dulls the blade quickly and will increase the chance of slippage.
Tip 4: Preserve Cleanliness. Usually clear the blade and the inner mechanism to take away gathered particles. Use a dry fabric to wipe down the software after every use. Keep away from utilizing solvents or lubricants that would degrade the plastic elements.
Tip 5: Get rid of Blade Segments Responsibly. Acquire snapped-off blade segments in a puncture-resistant container. Securely seal the container and eliminate it in accordance with native rules for sharps waste. By no means discard free blade segments normally trash receptacles.
Tip 6: Retailer the Knife Safely. When not in use, totally retract the blade and interact the locking mechanism. Retailer the knife in a delegated location away from kids and unauthorized customers. Think about using a software pouch or holster for secure transport.
Tip 7: Substitute Blades Promptly. Substitute the blade when it turns into uninteresting or broken. Making an attempt to power a uninteresting blade will increase the chance of slippage and damage. Use solely real Stanley alternative blades or these particularly advisable for the 10-817 mannequin.
Adhering to those pointers extends the service lifetime of the knife, and enhances consumer security. Correct dealing with and storage are important.
This concludes the sensible ideas part. A summation of the important thing factors of the “Stanley 10-817 25mm FatMax Xtreme snap-off knife” follows.
Conclusion
This exploration of the Stanley 10-817 25mm FatMax Xtreme snap-off knife has detailed its key options, encompassing blade segmentation, ergonomic deal with design, blade width issues, inherent sturdiness, the performance of its snap-off mechanism, its affiliation with the FatMax Xtreme sequence, and the importance of its mannequin identification. It has established the software as a mix of sensible design parts meant to fulfill skilled wants, providing a steadiness between utility, security, and longevity.
In abstract, the Stanley 10-817 capabilities as a consultant of its software class, embodying design decisions tailor-made to maximise effectivity and face up to demanding use instances. Its worth proposition rests in its means to ship constant efficiency with applicable dealing with. As software designs evolve, the ideas evident on this mannequin could proceed to tell future improvements. The consumer’s adherence to security pointers and advisable practices stays paramount in realizing its meant advantages.
